Powerflex Black Exhaust Bush | Renault Clio 2 RS 172 182

Powerflex Black Series Exhaust Bush EXH020BLK for Renault Clio 2 RS

The exhaust mounting system on a Renault Clio 2 RS 172 or 182 is exposed to constant movement, engine vibrations and significant temperature variations. Over time, the original rubber exhaust bush can become cracked, deformed or excessively soft.

When an exhaust mounting bush becomes worn, the exhaust system can move more than intended during acceleration, deceleration and changes in engine load. This can result in exhaust rattles, unwanted vibrations, contact with the bodywork or rear axle components and additional stress on other exhaust mounts and joints.

The Powerflex EXH020BLK replaces the original exhaust mounting bush with a reinforced Black Series polyurethane component designed to provide improved resistance to movement and demanding operating conditions.

Why replace a worn exhaust bush on a Clio 2 RS?

A deteriorated exhaust rubber mount can allow the exhaust system to move excessively. This movement may become particularly noticeable on a performance vehicle used aggressively on the road or during Trackday driving.

Continuing to use a damaged or excessively flexible mount can lead to exhaust rattles, knocks underneath the vehicle, unwanted contact between the exhaust and surrounding components and increased stress on the remaining exhaust mounts. A correctly supported exhaust system helps maintain its intended position during normal and sporty driving.

Powerflex Black Series polyurethane for sporty applications

The Powerflex Black Series EXH020BLK is designed for applications where greater resistance to movement is required. Its high-performance polyurethane construction provides a firmer alternative to the original rubber mounting material.

The Black Series range is intended for demanding applications including Trackday cars, Motorsport vehicles and performance road cars. The EXH020BLK allows the original exhaust mounting arrangement to be retained while replacing the worn rubber component.

Powerflex EXH020BLK exhaust bush installation

The EXH020BLK is designed to fit into the original exhaust mounting position. During installation, the existing rubber bush must be removed from the mounting bracket before fitting the Powerflex polyurethane component.

The condition of the surrounding exhaust mounting hardware should also be checked during installation. Correct positioning of the bush and exhaust system is important to prevent unnecessary tension or contact with neighbouring components.

How many EXH020BLK bushes are required?

The Powerflex EXH020BLK is supplied individually. On Renault Clio 2 RS models equipped with a twin-exit exhaust configuration, 2 bushes may be required depending on the exact exhaust mounting arrangement of the vehicle.

Compatible Renault Clio 2 RS models

Powerflex reference EXH020BLK is designed for the Renault Clio II performance range, including the Clio RS 172 and 182 applications.

• Renault Clio 2 RS 172 Phase 1 – Rear exhaust mounting application.
• Renault Clio 2 RS 172 Phase 2 – Rear exhaust mounting application.
• Renault Clio 2 RS 182 – Rear exhaust mounting application.
• Renault Clio II 172 / 182 – Powerflex exhaust mounting application, with quantity depending on vehicle configuration.

Powerflex EXH020BLK reference information

Powerflex reference: EXH020BLK
Application: Exhaust mounting bush
Range: Powerflex Black Series
Vehicle: Renault Clio II RS 172 / 182

Symptoms of a worn exhaust mounting bush

Several symptoms can indicate that an exhaust mounting bush needs inspection or replacement. Common signs include increased exhaust movement, rattling noises underneath the car, knocking during acceleration or deceleration, excessive vibration or visible deterioration of the original rubber.

On a Renault Clio 2 RS used for sporty driving or Trackday use, regularly checking the exhaust mounting system can help identify deterioration before it affects other components. A damaged bush should be replaced if excessive movement, cracking or deformation is observed.

Is the Powerflex Black Series suitable for Trackday use?

The Powerflex Black Series range is designed for applications where increased resistance to movement is required. The EXH020BLK is therefore suitable for sporty road use, Trackday applications and Motorsport-oriented vehicles when the corresponding application and mounting configuration are confirmed.

Why choose Powerflex EXH020BLK for your Clio 2 RS?

The Powerflex EXH020BLK reinforced exhaust bush provides a targeted replacement for the original rubber mounting component. Its polyurethane construction is designed to reduce excessive movement while retaining the original mounting principle.

For owners of a Renault Clio 2 RS 172 or 182, the EXH020BLK can be used during routine maintenance, exhaust replacement or preparation of a performance vehicle. The clearly identified Powerflex reference EXH020BLK also makes it easier to identify the correct component when searching for replacement parts.

Optimiz Access expertise in performance vehicles

Since 2010, Optimiz Access has specialised in parts, accessories, maintenance and personalisation for performance and premium vehicles, including Renault Sport, Audi, Volkswagen, Porsche, Mercedes and BMW.

Based in the Hauts-de-France region near Cambrai, Valenciennes, Arras, Seclin, Lille, Douai and Saint-Quentin, Optimiz Access also provides installation and maintenance services for performance vehicles. Orders can be shipped throughout France and internationally.

Frequently asked questions about Powerflex EXH020BLK

Is Powerflex EXH020BLK compatible with the Clio 2 RS 172?
Yes. The EXH020BLK is listed for Renault Clio II applications including the 172 and 182 performance models.

Is EXH020BLK compatible with the Clio 2 RS 182?
Yes. The reference is designed for the Renault Clio II 182 exhaust mounting application.

Is the EXH020BLK supplied as a pair?
No. The EXH020BLK is supplied individually. The required quantity depends on the exhaust system configuration.

What is the Powerflex reference?
The Powerflex reference for this reinforced exhaust bush is EXH020BLK.

Can EXH020BLK be used on a Trackday Clio 2 RS?
Yes. The Powerflex Black Series range is designed for demanding sporting and Motorsport applications, subject to confirming the correct vehicle and mounting configuration.

How can I tell if my exhaust bush is worn?
Check for cracks, deformation, excessive movement of the exhaust system, rattling noises or contact between the exhaust and nearby components. If any of these symptoms are present, inspect the exhaust mounting system.

Keep your Clio 2 RS exhaust correctly supported

A deteriorated exhaust bush can allow excessive movement and create unwanted noise, vibration and additional stress within the exhaust system. For the Renault Clio 2 RS 172 and 182, the Powerflex Black Series EXH020BLK provides a reinforced polyurethane replacement for the applicable exhaust mounting position.

Other Powerflex components and parts for the maintenance and personalisation of your Renault Clio 2 RS can be found at the bottom of the product page.

Note: EXH020BLK is supplied individually. Check your vehicle and exhaust configuration before ordering to determine the required quantity.