Pensez à sélectionner votre vehicule pour limiter les resultats de recherche

Kit suspension arriere ohlins Clio Gr N

11181
x 2

Ecrou FIH RDL M6 Clio Gr N
€4.82
En cours de réappro
x 2

Collier fix. bonbonne Clio Gr N
€4.85
En Stock
x 2

Rondelle sps Ø6
€0.60
En Stock
x 2

Vis CHC M6-20 Clio Gr N
€2.71
En Stock
x 4

Official Renault Sport Rear Spring Cup - Clio 2 Gr N & Twingo R1 (Rallycross) - Ref. 7711129353
€233.42
En Stock
x 2

Silentbloc Pt F
€54.79
En cours de réappro

Rondelle fixation coupelle de ressort Clio Gr N
€8.96
En Stock

Ressort AR - Asphalte - noir 1 bande jaune - R6 Kg Clio Gr N
€66.13
En Stock

Amortisseur AR D - Asphalte - 3 voies Clio Gr N
€1,464.32
En Stock

Amortisseur AR G - Asphalte - 3 voies Clio Gr N
€1,464.32
En Stock
€3,304.94
Tax included
Quantity

Pack content

Ecrou FIH RDL M6 Clio Gr N Référence: 7703034146

Data sheet

Enable Recurring Profile
Non
Marque du véhicule
Renault
Modèle du véhicule
Renault Clio 2
Motorisation
GR N
Homologué
Non
In feed
Non
Emplacement
Produit non mécanisable
Non
Produit dangereux
Non

Ensure the correct mounting of your suspension components with this Renault shock absorber reservoir mounting clamp, reference 7711068525. Designed for specific Renault motorsport and Cup applications, this clamp is used to secure the remote shock absorber reservoir and pressure sensor in the appropriate installation.

Suitable for listed applications including the Renault Clio Gr. N, Clio X65 Cup, Clio 3 X85 Cup, Clio R3 and Twingo R2, this replacement fastener is intended for suspension maintenance and restoration. Check the original part reference and mounting configuration before ordering to ensure compatibility with your vehicle.

Renault Shock Absorber Reservoir Mounting Clamp – 7711068525

Correct mounting is essential when maintaining a suspension system equipped with remote shock absorber reservoirs. A missing, damaged or unsuitable mounting clamp can allow components to move from their intended position, potentially causing contact with nearby parts or additional stress during vehicle use.

The Renault reservoir mounting clamp, reference 7711068525, is designed for the relevant suspension installation. It helps secure the shock absorber reservoir and pressure sensor in their designated positions, making it a useful replacement component during suspension servicing or restoration of a Renault competition vehicle.

Why Is the Reservoir Mounting Clamp Important?

On a suspension system with a remote reservoir, the mounting arrangement must keep the components properly located under the operating conditions for which the vehicle is designed. An unsuitable or damaged clamp can compromise secure mounting and may lead to unwanted movement or interference with surrounding components.

When replacing suspension parts, inspect the clamp and its mounting points. Choose a replacement that matches the original reference and installation requirements rather than relying on appearance alone.

Compatible Renault Models

The applications listed for this part include the following Renault motorsport and Cup models:

  • Renault Clio Group N (Gr. N)
  • Renault Clio X65 Cup
  • Renault Clio 3 X85 Cup
  • Renault Clio R3
  • Renault Twingo R2

Compatibility can depend on the suspension specification and mounting arrangement. Confirm that reference 7711068525 corresponds to your particular vehicle and installation before ordering.

Product Specifications

  • Product type: Shock absorber reservoir mounting clamp
  • Manufacturer reference: 7711068525
  • Application: Remote shock absorber reservoir and pressure sensor mounting
  • Vehicle range: Selected Renault Clio and Twingo motorsport applications
  • Purpose: Replacement and maintenance of the original mounting arrangement

Renault Sport Parts and Expertise at Optimiz Access

Since 2010, Optimiz Access has specialised in parts and accessories for sports and premium vehicles, including Renault Sport, Audi, Volkswagen, Porsche, Mercedes and BMW. Based in the Hauts-de-France region of France, near Cambrai, Valenciennes, Arras, Seclin, Lille, Douai and Saint-Quentin, Optimiz Access also offers vehicle maintenance and installation services at its premises, with shipping throughout France and internationally.

Frequently Asked Questions

What is the purpose of this Renault mounting clamp?
It is used to secure the remote shock absorber reservoir and pressure sensor in the relevant suspension installation.

Does this clamp fit every Renault Clio or Twingo?
No. The listed applications cover specific motorsport and Cup versions. Check the vehicle version, suspension configuration and part reference before ordering.

Can I find related suspension parts on the same page?
Where available, related components can be found at the bottom of this product page.

Find the Correct Suspension Replacement Part

For suspension maintenance on your Renault Clio Gr. N, Clio Cup, Clio R3 or Twingo R2, check reference 7711068525 against your original mounting arrangement. Correct part identification helps ensure a suitable fit during maintenance or restoration.

Data sheet

Enable Recurring Profile
Non
Marque du véhicule
Renault
Modèle du véhicule
Renault Clio 2
Modèle du véhicule
Renault Twingo 2
Modèle du véhicule
Renault Clio 3
Motorisation
R3
Motorisation
X85 Cup
Motorisation
GR N
Motorisation
X65 Cup
Motorisation
R2
Homologué
Non
In feed
Non
Produit non mécanisable
Non
Produit dangereux
Non
Rondelle sps Ø6 Référence: 7711126686

Data sheet

Enable Recurring Profile
Non
Marque du véhicule
--Universel--
Modèle du véhicule
--Universel--
Motorisation
--Universel--
Homologué
Oui
In feed
Non
Produit non mécanisable
Non
Produit dangereux
Non
Vis CHC M6-20 Clio Gr N Référence: 7711128925

Data sheet

Enable Recurring Profile
Non
Marque du véhicule
Renault
Modèle du véhicule
Renault Clio 2
Motorisation
GR N
Homologué
Non
In feed
Non
Produit non mécanisable
Non
Produit dangereux
Non

Optimize the performance and safety of your Renault Clio 2 Group N or Twingo R1 (including Rallycross) with this official Renault Sport rear spring cup (Ref. 7711129353), sold individually. Essential for precise spring retention, it guarantees optimal force transmission and impeccable road holding. Don't let a wear part compromise your competition suspension's effectiveness.

In motorsport, every suspension component is put to the test. The rear spring cup is a fundamental part that ensures the positioning and retention of the spring on the shock absorber and suspension arm. Its design and robustness are crucial for guaranteeing efficient force transmission and precise road holding. At Optimiz Access, your exclusive distributor of official Renault Sport parts for Twingo R1 and other competition vehicles, we know that the performance of your Renault Clio 2 Group N or Twingo R1 (including Rallycross) depends on the quality of every component. This genuine Renault Sport rear spring cup (Reference 7711129353) is the essential part to replace a worn or damaged element, ensuring the reliability and effectiveness of your rear axle.

What do you risk by neglecting this official Renault Sport rear spring cup?

A defective, worn, or non-compliant rear spring cup can have critical consequences on the handling and safety of your Renault Clio 2 Gr N or Twingo R1 (Rallycross incl.). Here's what you could lose by not replacing it:

  • Deterioration of Road Holding and Loss of Control

    The primary role of the spring cup is to keep the spring perfectly aligned and under tension. If the cup is damaged, the spring can shift, become misaligned, or even detach, leading to a sudden and unpredictable loss of road holding, erratic rear axle behavior, and a major risk of losing control, especially in corners or at high speeds. Your ability to maintain a precise trajectory would be severely compromised.

  • Premature Wear of Spring and Shock Absorber

    A worn cup or one with play no longer allows the spring to work correctly. Forces are not transmitted uniformly, which can cause abnormal fatigue and premature wear of the spring itself, or even damage the shock absorber rod or body. What should have been a small part replacement would turn into a much higher cost of replacing the entire spring-shock absorber assembly. Protect the integrity of your suspension system.

  • Abnormal Noises and Discomfort

    A defective cup can generate metallic noises (clunking, grinding) from the rear axle, particularly on rough roads or during load transfers. These noises are not only unpleasant but also indicate a suspension malfunction, decreasing your confidence behind the wheel and the pleasure of driving your competition vehicle. Listen to your car's warning signs.

  • Risk of Breakage in Race or During Hard Landings

    In the demanding environment of motorsport (Rally, Rallycross), where suspensions undergo extreme stresses (jumps, landings, driving on irregular surfaces), a weakened spring cup is a potential breaking point. Its failure in full action can lead to forced immobilization, race retirement, and much greater consequential damage to the vehicle. Don't expose your Clio 2 Gr N or Twingo R1 to such a risk.

Why choose this official Renault Sport rear spring cup?

This rear spring cup, bearing the official reference 7711129353, is a genuine part from the Renault Sport catalog. It is specifically designed to perfectly fit the Renault Clio 2 Group N and the Renault Twingo R1 (including Rallycross). As the exclusive distributor of official Renault Sport parts for these models, Optimiz Access guarantees you direct access to a part of the highest quality, conforming to the rigorous demands of motorsport. Its manufacturing and materials are optimized to withstand extreme stresses, ensuring:

  • Perfect compatibility and precise fit.
  • Exceptional robustness against shocks and vibrations.
  • Maintenance of your suspension's original performance.
  • Maximum reliability in racing conditions.

Compatibility and Installation:

  • Is this cup sold individually?

    Yes, this rear spring cup (ref. 7711129353) is sold individually. Your vehicle will require two cups to equip its rear axle (one per side). Make sure to order the necessary quantity for your replacement.

  • Are other parts needed for installation?

    Installation of the spring cup typically requires specific hardware (screws, nuts, washers) for its fastening to the rear axle, depending on the model and configuration of your suspension. You can find the necessary hardware for fastening the cups to the rear axle, as well as other complementary suspension products, at the bottom of this product page. It is essential to use the appropriate hardware and adhere to the tightening torques.

  • Is replacement complex?

    Replacing a rear spring cup requires automotive mechanical knowledge and specific tools (spring compressor). It is crucial to ensure the correct positioning of the cup and spring to guarantee safety and performance. We strongly recommend entrusting this operation to a qualified professional accustomed to competition vehicles. At Optimiz Access, our workshops offer installation of this part and maintenance of your suspension.

Optimiz Access's commitment: Your exclusive partner for Renault Sport Rally performance

As the exclusive distributor of official Renault Sport parts for Twingo R1 and a specialist in sport and premium vehicles since 2010, Optimiz Access is your essential reference. Based in Hauts-de-France, near Cambrai, Valenciennes, Arras, Seclin, Lille, Douai, Saint-Quentin, we provide you with recognized technical expertise and direct access to the most demanding genuine parts. Enjoy fast worldwide delivery so your Clio 2 Gr N or Twingo R1 Rallycross is always ready to hit the track.

Don't compromise the reliability of your competition suspension. Order this official Renault Sport rear spring cup today and ensure the performance and safety of your rear axle!

Data sheet

Enable Recurring Profile
Non
Marque du véhicule
Renault
Modèle du véhicule
Renault Clio 2
Modèle du véhicule
Renault Twingo 2
Motorisation
R1
Motorisation
GR N
Homologué
Non
In feed
Non
Produit non mécanisable
Non
Produit dangereux
Non

Don't let a sagging or damaged rear bump stop compromise your race car's rear axle stability. The genuine Renault Sport Pt F silentbloc (rear shock absorber bump stop) (reference 7711162398) for Clio R3, Twingo R1, Twingo R2, and Clio Group N guarantees ultra-precise rear axle tracking and optimal bottom-out control under heavy loads.

Specifically engineered to absorb extreme hydraulic stress in motorsport, this heavy-duty rear suspension silentbloc protects your shock absorbers and stabilizes the chassis on rally stages and race tracks. It is a vital safety component for the rigorous maintenance and sharp customization of your sports vehicle's running gear.

The risks of a worn rear shock bump stop: what your race car loses in stability

In rally and circuit racing, the rear axle of Renault Sport Group N, R1, R2, and R3 models undergoes massive dynamic loads during hard braking, kerb impacts, and severe compressions. Left unchanged for too long, a tired or cracked factory shock absorber silentbloc compresses permanently: this introduces unwanted play into the shock shaft, alters rear wheel alignment mid-corner, and severely harms traction.

Neglecting the condition of this rear shock absorber stop also exposes your coilovers to destructive metal-on-metal bottoming out at full stroke, risking severe damage to the shock rod and internal valving. By replacing worn parts with this official Renault Sport 7711162398 Pt F silentbloc, you eliminate the risk of damaging bottom-out: you lock in rear axle consistency, maintain stable geometry in high-speed turns, and extend the lifespan of your race dampers.

Manufactured from high-density technical elastomer approved by Renault Sport, this Pt F silentbloc provides optimal rigidity and maximum thermal resistance against intense friction in competitive racing conditions.

Chassis consistency and race shock absorber protection

As a key homologated component for customer rally models, this rear suspension bump stop for Clio R3 and Twingo R1 / R2 absorbs extreme impacts without permanent deformation. It is an essential component to renew during regular chassis overhauls to ensure preventive maintenance and dynamic customization of your sports vehicle.

Compatible competition vehicles and models list

This genuine Renault Sport part (reference 7711162398) directly fits the following motorsport applications:

  • Renault Clio 3 R3 / R3 MAX – Rear race suspension.
  • Renault Twingo 2 R1 / R1 Evo – Rally rear axle.
  • Renault Twingo 2 R2 / R2 EVO – Rear race shock absorbers.
  • Renault Clio 2 RS & Clio 3 RS Group N – Fits homologated competition rear coilovers.

Trust Optimiz Access motorsport expertise

Since 2010, Optimiz Access has been a trusted specialist supplying high-performance spare parts, chassis hardware, and accessories for the customization and maintenance of sports vehicles (Renault Sport, Alpine, Audi, Volkswagen, Porsche, Mercedes, BMW). In our workshops located in Northern France — closely serving Cambrai, Valenciennes, Arras, Seclin, Lille, Douai, and Saint-Quentin —, our expert technicians perform diagnostic checks, wheel alignment setups, and full suspension overhauls daily. We package every order with care to guarantee fast shipping across Europe and worldwide.

Frequently Asked Questions about Renault Sport Pt F Silentbloc (FAQ)

Is this a genuine Renault Sport factory part?
Yes, this is official part number 7711162398 directly from the Renault Sport competition catalog, ensuring full compliance with technical regulations and homologation papers.

Is it necessary to replace rear shock silentblocs in pairs?
To maintain symmetrical handling across the rear axle and prevent uneven stability under heavy braking, replacing rear shock absorber bump stops in pairs is strongly recommended.

Secure your rear axle handling today

Don't let a tired bump stop spoil your driving precision or damage expensive race dampers. Trust the technical expertise of Optimiz Access and order your Pt F silentbloc today.

Note: Motorsport shock absorbers, top mounts, Uniball rose joints, race springs, and rear axle components can be viewed at the bottom of this product page.

Data sheet

Enable Recurring Profile
Non
Marque du véhicule
Renault
Modèle du véhicule
Renault Clio 2
Modèle du véhicule
Renault Twingo 2
Modèle du véhicule
Renault Clio 3
Motorisation
GR N
Motorisation
R1
Motorisation
R3
Motorisation
R2
Homologué
Non
In feed
Non
Produit non mécanisable
Non
Produit dangereux
Non

Rondelle fixation coupelle de ressort Clio Gr N Référence: 7711129389

Data sheet

Enable Recurring Profile
Non
Marque du véhicule
Renault
Modèle du véhicule
Renault Clio 2
Motorisation
GR N
Homologué
Non
In feed
Non
Produit non mécanisable
Non
Produit dangereux
Non
Ressort AR - Asphalte - noir 1 bande jaune - R=6 Kg Clio Gr N 7711129570

Data sheet

Enable Recurring Profile
Non
Marque du véhicule
Renault
Modèle du véhicule
Renault Clio 2
Motorisation
GR N
Homologué
Oui
In feed
Non
Emplacement
Produit non mécanisable
Non
Produit dangereux
Non
Amortisseur AR D - Asphalte - 3 voies Clio Gr N Référence: 7711129752

Data sheet

Enable Recurring Profile
Non
Marque du véhicule
Renault
Modèle du véhicule
Renault Clio 2
Motorisation
GR N
Homologué
Non
In feed
Non
Produit non mécanisable
Non
Produit dangereux
Non
Amortisseur AR G - Asphalte - 3 voies Clio Gr N Référence: 7711129753

Data sheet

Enable Recurring Profile
Non
Marque du véhicule
Renault
Modèle du véhicule
Renault Clio 2
Motorisation
GR N
Homologué
Non
In feed
Non
Produit non mécanisable
Non
Produit dangereux
Non