Exhaust Manifold Gasket | Renault Twingo 2 RS / R2

Exhaust Manifold Gasket for Renault Twingo 2 RS

The exhaust manifold gasket provides the sealing interface between the cylinder head and exhaust manifold. On the Renault Twingo 2 RS 1.6 16V, a damaged or incorrectly sealed gasket can lead to exhaust leakage after repeated dismantling, manifold replacement or prolonged use.

A worn gasket may cause exhaust noise, hissing, soot marks or exhaust gas odours around the manifold. When carrying out work on the exhaust system, replacing the gasket helps restore the sealing interface between the cylinder head and exhaust manifold.

Why replace the exhaust manifold gasket?

Reusing an already compressed gasket can compromise the sealing of the exhaust manifold. A leak between the cylinder head and manifold may appear as a hissing or blowing noise, particularly when the engine is cold, as well as soot deposits around the joint.

On a Twingo 2 RS used for spirited driving, Trackday or competition, repeated thermal cycles place additional demands on the exhaust system and its sealing components. Whenever the exhaust manifold is removed, checking and replacing the gasket is therefore an important part of the refitting process.

This exhaust manifold gasket is designed for Renault Twingo 2 RS applications equipped with the K4M engine and is also associated with certain Twingo R2 competition configurations.

Exhaust manifold sealing and engine protection

The exhaust manifold gasket is positioned between the mating surfaces of the cylinder head and manifold. Its purpose is to prevent exhaust gases from escaping through the joint before they enter the rest of the exhaust system.

A worn, damaged or incorrectly positioned gasket can result in an insufficiently sealed exhaust system and may require the manifold to be removed again. When working on the K4M exhaust manifold, the condition of the gasket should therefore be carefully considered.

Exhaust manifold gasket specifications

• Type: Exhaust manifold gasket
• Main application: Renault Twingo 2 RS 1.6 16V
• Engine: K4M
• Application: Exhaust manifold to cylinder head sealing
• Reference: Renault 8200365915

Compatible Renault Twingo models

This reference is primarily associated with Renault Twingo II models equipped with the 1.6 16V K4M engine, including sporting and competition applications.

• Renault Twingo 2 RS 1.6 16V 133 hp – K4M engine.
• Renault Twingo 2 RS Phase 1 – subject to engine and manifold configuration.
• Renault Twingo 2 RS Phase 2 – subject to engine and manifold configuration.
• Renault Twingo R1 – compatibility should be checked according to the manifold configuration.
• Renault Twingo R2 – competition application subject to the actual manifold configuration.

For competition vehicles fitted with a specific or modified exhaust manifold, the existing component should be compared with the replacement gasket before ordering.

Twingo R2 competition application

The Renault Twingo R2 uses a competition-oriented configuration based on the K4M engine. During an engine rebuild or exhaust manifold service, the condition of the manifold gasket should be checked to prevent leakage at the cylinder head connection.

On a rally car that has received specific competition modifications, particularly to the exhaust manifold or exhaust system, compatibility should always be checked against the components actually fitted to the vehicle.

What are the symptoms of a worn exhaust manifold gasket?

Several symptoms can indicate a possible sealing issue: hissing or blowing noises, especially when cold, exhaust gas odours, soot marks around the manifold or increased exhaust noise during acceleration.

These symptoms can also have other causes. The exhaust manifold, gasket and mating surfaces should therefore be inspected to identify the actual source of the leak.

When should the exhaust manifold gasket be replaced?

Replacement is particularly relevant when the exhaust manifold is removed, during cylinder head work or as part of engine maintenance.

The gasket should also be inspected whenever an exhaust leak is suspected around the connection between the manifold and cylinder head.

Frequently asked questions

Is this gasket suitable for the Twingo 2 RS 133 hp?
This reference is associated with Twingo II applications equipped with the K4M engine. Compatibility should be checked against the exact vehicle and exhaust manifold configuration.

Is this gasket suitable for the Twingo R2?
The reference is associated with certain Twingo R2 applications. For competition vehicles, the exact exhaust manifold fitted to the car should be checked before ordering.

What are the symptoms of a faulty exhaust manifold gasket?
A leak can cause hissing or blowing noises, soot deposits, exhaust gas odours or increased noise around the manifold.

Should the gasket be replaced after removing the manifold?
When a gasket has already been compressed, replacing it during reassembly provides a fresh sealing element. The mating surfaces should also be clean and properly inspected.

Optimiz Access expertise for sporting vehicles

Since 2010, Optimiz Access has specialised in parts and accessories for sporting and premium vehicles, including Renault Sport, Audi, Volkswagen, Porsche, Mercedes and BMW. The company also provides installation and maintenance services for sporting vehicles at its premises in the Hauts-de-France region, near Cambrai, Valenciennes, Arras, Seclin, Lille, Douai and Saint-Quentin.

Other parts required for the maintenance or preparation of your Twingo 2 RS can be found at the bottom of the product page on which you are currently browsing.

Maintain proper exhaust manifold sealing

An exhaust manifold leak can result in additional work on the exhaust system. When refitting a Twingo 2 RS exhaust manifold, using the correct gasket helps restore the sealing interface between the cylinder head and manifold.

Note: For a Twingo R2 or competition vehicle equipped with a specific exhaust manifold, check the exact manifold configuration before ordering.